ISA Interchange

Welcome to the official blog of the International Society of Automation (ISA).

All Posts

Webinar Recording: Calibration Uncertainty and Why Technicians Need to Understand It

 

This ISA webinar on calibration uncertainty was presented by Ned Espy and Roy Tomalino of Beamex

 

Being aware of the uncertainty related to a measurement is a very fundamental concept and you should not make any measurements unless you are aware of the related uncertainty.

Watch the ISA webinar replay and learn all about calibration uncertainty and why it is crucial to understand it. Experts provide real-life application examples of how uncertainty affects calibration results.

Blog Posts
How Often Do Measurements Need to Be Calibrated?
Just in Time, or Just Too Late? A Kaizen Approach to Calibration
How to Improve Industrial Productivity with Loop Calibration
Temperature Calibration: Using a Dry Block to Calculate Total Uncertainty
How Can Advanced Calibration Strategies Improve Control Performance?
How to Calibrate a Pressure Transmitter

Webinar Recordings
Uncertainty in Calibration
Calibration Uncertainty and Why Technicians Need to Understand It
How to Avoid the Most Common Mistakes in Field Calibration
Learn Advanced Techniques in Field Calibration
How to Build an Industrial Calibration System Business Case
How to Use Calibration Tools for Accurate Process Temperature Measurement
How Does Low Flow Affect Differential Pressure Flowmeter Calibration?
Three Common Pitfalls of Pressure Calibration

Free Downloads
ISA Industrial Calibration Worksheets
Measurement Uncertainty Analysis Excel template plus book excerpt
Calibration Handbook of Measuring Instruments book excerpt
In-Depth Guide to Calibration for the Process Industries eBook
Calibration Uncertainty for Non-Mathematicians white paper

 

About the Presenter
Ned Espy has been promoting calibration management with Beamex for more than 20 years. He has directed field experience in instrumentation measurement application for over 27 years. Today, Ned provides technical & application support to Beamex clients and partners throughout North America.

 

Connect with Ned
LinkedIn

 

 

 

About the Presenter
Roy Tomalino has been teaching calibration management for 14 years. Throughout his career, he has taught on four different continents to people from over 40 countries. His previous roles include technical marketing engineer and worldwide trainer for Hewlett-Packard and application engineer with Honeywell. Today, Roy is responsible for all Beamex training activities in North America.

 

Connect with Roy:
48x48-linkedinEmail

 

 

Related Posts

COVID-19 and Industrial Cybersecurity: Studies in Risk Response

I never thought that I’d be comparing toilet-roll purchasing habits with cybersecurity risk management, b...
Contributing Author Jun 2, 2020 5:15:00 AM

Tesla's Virtual Power Plant: Re-Envisioning the Electric Grid

Consider the electric grid. It blankets most of the world. Its existence and reliability have defined the...
Kara Phelps May 26, 2020 5:15:00 AM

How to Build a Standards-Based Cybersecurity Culture: Learn More in ISA's New Whitepaper

Industrial control systems (ICS) are rarely protected adequately against cyber threats, and that's a seri...
Kara Phelps May 22, 2020 5:00:00 AM