ISA Interchange

Welcome to the official blog of the International Society of Automation (ISA).

This blog covers numerous topics on industrial automation such as operations & management, continuous & batch processing, connectivity, manufacturing & machine control, and Industry 4.0.

The material and information contained on this website is for general information purposes only. ISA blog posts may be authored by ISA staff and guest authors from the automation community. Views and opinions expressed by a guest author are solely their own, and do not necessarily represent those of ISA. Posts made by guest authors have been subject to peer review.

All Posts

Modified Smith predictor design for periodic disturbance rejection

This is from a series of articles reprinted from the journal ISA Transactions.  All ISA Transactions articles are free to ISA members, or can be purchased from Elsevier Press.

 

Thermal Chamber Experiment setup of a thermal chamber

 

Abstract: In this paper, a modified Smith predictor control scheme is proposed for periodic disturbance rejection in both stable and unstable processes with time delay. Without affecting the superior setpoint response of Smith predictor control, the regulation performance under periodic disturbance can be enhanced significantly by the proposed design. Meanwhile, the asymptotical rejection for non-periodic disturbance will also be improved. Internal stability is investigated for a closed-loop control system. The effectiveness of the proposed scheme will be demonstrated by simulations as well as a test on an experimental thermal system.

  Free Bonus: To read the full article on Smith predictor control, click here.

ISA membership entitles you to free access to all ISA Transactions articles plus a wealth of technical content, industry information, free webinars, training opportunities, program discounts, certification and licensure and professional networking.

Join ISA ... learn, advance, succeed!


Related Posts

Ask the Automation Pros: Achieving the Best Feedforward Control

The following discussion is part of an occasional series, "Ask the Automation Pros," authored by Greg McM...
Greg McMillan Jan 17, 2025 7:00:00 AM

Methods Manufacturers Are Adopting to Enable a Scalable, Low-Cost IoT Connected Factory

Manufacturers are implementing scalable, low-cost IoT-connected factories using wireless sensor networks ...
Sunthar Subramanian Jan 14, 2025 7:00:00 AM

The Flaws of Flow Meters: Part 2

Introduction Pipelines in every process industry are outfitted with flow meters to detect the actual amou...
Abhishek Sharma Jan 10, 2025 7:00:00 AM