This education & training roundup was compiled by Joel Don, ISA's social media community manager.
During four consecutive weeks in July, ISA will be offering a series of basic-to-advanced, hands-on and highly-intensive industrial data communications and cybersecurity training courses. Be prepared to act not react, with ISA’s new System Wide Awareness Training (S.W.A.T.) Camp, intensive training for protecting control systems from cyberattack. In August, look to the Mile High City for hands-on expert-led offerings at ISA’s Technical Training Camp. Sponsored by the ISA Denver Section, this technical training event includes ISA’s highly experienced subject-matter experts teaching a series of iSA's most popular and world-class technician, automation engineering, safety, and security courses.
The complete roundup of ISA education and training programs for July and August is listed below, including classroom courses, online programs, webinars and certification exam preparation.
Special Spring-Summer Discount Offer
Save $300 when you use promo code TRN17ST by 31 July 2016. The 2016 spring and summer discount applies to multi-day, classroom courses and online, instructor-assisted courses offered by ISA in 2016. To take advantage of the special offer or get more information on qualifying courses, please contact ISA customer service to register using promo code TRN17ST by 31 July 2016: +1 919-549-8411. This special offer is not available through online registration.
Onsite Training
In addition to taking ISA classroom training at ISA headquarters, regional locations and industry events, you can also receive customized ISA training at your facility through ISA Onsite Training. This option can bring any ISA course or combination of courses – along with ISA’s world-class instructors, training materials and portable laboratories – directly to you. Simply pick the time and place. Contact ISA at +1 919-549-8411 or info@isa.org.
Note: If a class date is not showing in the course offerings page or registration appears closed, contact ISA at info@isa.org or call customer service at +1 919-549-8411 to get a registration update or waiting list status.
Fundamental Skills Training
Introduction to Industrial Processes, Measurement and Control (FG07)
11-15 July (NC)
8-12 August (TX)
Developing & Applying Standard Instrumentation & Control Documentation (FG15)
1-2 August (IL)
Technical Skills Training
Instrumentation Maintenance
Advanced Operation of Digital (Smart) Transmitters and Digital Valve Controllers (TS17)
1-5 August (PA)
Electrical Controls for the Controls System Technician (TI23)
1-5 August (PA)
Installing, Calibrating & Maintaining Electronic Instruments (TI25)
8-12 August (CA)
Control Systems
Tuning Control Loops (TC05)
15-17 August (CA)
Troubleshooting Instrumentation and Control Systems (TC10)
18-19 August (CA)
Automation Professional Skills
Building Automation
Introduction to Building Automation Systems (EA15)
6-8 July (NC)
Cybersecurity
Using the ISA/IEC 62443 Standards to Secure Your Control System (IC32)
19-20 July (TX)
1-2 August (DE)
Assessing the Cybersecurity of New or Existing IACS Systems (IC33)
3-5 August (DE)
IACS Cybersecurity Design & Implementation (IC34)—NEW!
30 August - 1 September (CA)
IACS Cybersecurity Operations & Maintenance (IC37)—NEW!
6-8 July (IL)
Energy
Practical IEC 61850 for Substation Automation (EA25)
29-31 August (NC)
Measurement and Control
Industrial Pressure & Level Measurement Engineering (EI05)
29-30 August (IL)
Industrial Flow Measurement Engineering (EI10)
31 August -2 September (IL)
Plant Maintenance
Sizing, Selecting, and Applying Process Control Valves (EI30)
9-11 August (DE)
Safety
Safety Instrumented Systems: Design, Analysis & Justification (EC50)
18-22 July (IL)
Advanced Safety Integrity Level (SIL) Selection (EC52)
25-26 July (IL)
Advanced Design & SIL Verification (EC54)
27-28 July (IL)
Applying Instrumentation in Hazardous (Classified) Locations (ES10)
3-4 August (IL)
Fire & Gas System Engineering: Performance-Based Methods for Process Facilities (EC56P)
29-31 August (TX)
Certification and Licensure Preparation
Control Systems Engineering (CSE) PE Exam Review Course (EN00)
6-8 July (PA)
18-20 August (TX)
Certified Control System Technician (CCST) Level II Exam Review Course (TS02)
11–14 July (IL)
Certified Control Systems Technician® (CCST®) Level II Exam Review Course (TS00)
8-11 August (IL)
Certified Control Systems Technician® (CCST®) Level III Exam Review Course (TS03)
15-18 August (IL)
Certified Automation Professional® (CAP®) Exam Review Course (EC00)
29-31 August (NC)
Special Training Events
McNeese State University
Safety Instrumented Systems: Design, Analysis & Justification (EC50)
29 August - 2 September (LA)
Automation Engineering Survival Training: Integrator Version (AESTIV)*
11-15 July (TX)
Process Automation Boot Camp–for Non-Maintenance Personnel (PABC)
18-22 July (PA)
Extreme Instrumentality: Electrical to Instrumentation Cross Training Boot Camp (XTBC)
25-29 July (NC)
Technician Training Boot Camp (TTBC)
11-15 July (LA)
Tactics for Advanced Troubleshooting Boot Camp (TATC)
22-26 August (IL)
Part of System Wida Area Training (S.W.A.T.)–July 2016
IT Survival Basics for I&C Personnel (TS04)
11-15 July (DE)
Industrial Data Communication Systems (TS06)
18-22 July (DE)
Industrial Networking & Security (TS12)
25-29 July (DE)
Using the ISA/IEC 62443 Standards to Secure Your Control System (IC32)
1-2 August (DE)
Assessing the Cybersecurity of New or Existing IACS System (IC33)
3-5 August (DE)
Part of the Colorado Technical Training Camp–August 2016
Technician Training Boot Camp (TTBC)*
8-12 August (CO)
Automation Engineering Survival Training (AEST)*
15-19 August (CO)
Safety Instrumented Systems: Design, Analysis & Justification (EC50)*
22-26 August (CO)
Advanced Safety Integrity Level (SIL) Selection (EC52)*
29-30 August (CO)
Advanced Design & SIL Verification (EC54)*
31 August - 1 September (CO)
Online Instructor-Assisted Courses
Cyber Security for Automation, Control and SCADA Systems (IC32E)
18 July—9 September
Safety Instrumented Systems: Design, Analysis & Justification (EC50E)
25 July—16 September
Sistemas Instrumentados de Seguridad - Diseño, análisis y justificación (EC50ESP)
25 July—16 September
Certified Automation Professional® (CAP®) Exam Online Review Course (EC00E)
1 August - 28 October
Applying Instrumentation in Hazardous Locations (ES10E)
8 August - 30 September
Fundamentals of Industrial Process, Measurement and Control (FG05E)
15 August - 4 November
Certified Control Systems Technician (CCST) Level I Online Exam Review Course (TS00E)
22 August - 4 November
Live Webinar Series
Save up to 25% with Series Pricing when you register for all the webinars in a series at one time. To take advantage of series pricing, please contact ISA customer service at +1 919-549-8411.
Introduction to Measurement & Control Series*
Introduction to Pressure Measurement (FG05W5)
6 July
Electrical Series
Grounding in Instrumentation Systems (TI21W1)
13 July
Noise Reduction in Signal & Power Circuits (TI21W2)
27 July
Instrumentation in Hazardous Locations Series - NEW!
10 August
Protection Methods in Applying Instrumentation in Hazardous Locations & Enclosures: Intinsic Safety (ES10W2)
24 August
7 September
Partner Training
Can’t take time off work for training?
The Engineering Institute of Technology offers online solutions to meet your long and short-term goals. ISA members receive a 5% discount off of any regularly priced course. (ISA membership number is required)
Professional Certificate of Competency in Subsea Oil and Gas Technology - CSB
Begins: 4 July (3 months)
Cybersecurity for Automation, Control, and SCADA Systems - CCW
Begins: 11 July (3 months)
Professional Certificate of Competency in Chemical Engineering and Plant Design - CCG
Begins: 18 July (3 months)
Professional Certificate of Competency in Control Valve Sizing, Selection and Maintenance - CVL
Begins: 8 August (3 months)
Professional Certificate of Competency in Programmable Logic Controllers (PLCs) and SCADA Systems - CAU
Begins: 12 August (3 months)
Professional Certificate of Competency in Instrumentation, Automation and Process Control - CIP
Begins: 29 August (3 months)
To learn more about EIT contact maria.davidson@eit.edu.au for more information. Also, consider one of our on–demand courses from EIT's sister company IDC Technologies.
§ § § § § §
Gain significant benefits and savings. Become an ISA member.
When you become an ISA member, you’ll join more than 30,000 automation and control professionals who collaborate to share ideas and insights, and solve technical challenges. And, you’ll receive up to 20 percent off on ISA products, including training courses! To review the complete array of ISA member benefits, click here or contact ISA customer service at +1 919-549-8411 or info@isa.org.
Become an ISA Instructor!
ISA is always looking to expand its pool of qualified subject matter experts to teach, develop or provide assessment services for our public and private clients/customers. Wouldn’t you like to make a difference and join this elite group of automation and control professionals? Click here to find out more about becoming an ISA instructor.
Have a great course idea? Click here and suggest a new ISA class.
When you become an ISA member, you’ll join thousands of automation and control professionals who collaborate to share ideas and insights, and solve technical challenges. And, you’ll receive up to 20 percent off on ISA products, including training courses. To review the complete array of ISA member benefits, click the link below or contact ISA customer service at +1 919-549-8411 or info@isa.org.
Click here to join ISA ... learn, advance, succeed!
