ISA Interchange

Welcome to the official blog of the International Society of Automation (ISA).

This blog covers numerous topics on industrial automation such as operations & management, continuous & batch processing, connectivity, manufacturing & machine control, and Industry 4.0.

The material and information contained on this website is for general information purposes only. ISA blog posts may be authored by ISA staff and guest authors from the automation community. Views and opinions expressed by a guest author are solely their own, and do not necessarily represent those of ISA. Posts made by guest authors have been subject to peer review.

All Posts

Webinar Recording: How to Calibrate Analytical Instruments

 

This ISA webinar on instrument calibration was presented by Ian Verhappen, P.Eng., CAP, co-author of A Guide to the Automation Body of Knowledge, and Ned Espy and Roy Tomalino of Beamex.

 

his is the first of a series about maintaining analytical instrumentation. Insight into common applications and issues of analytical instrumentation as well best practices to calibrate will be explained. The webinar will provide examples of how you document “one-sided” calibrations, such as pH/ORP and gas sensors/analyzers. This approach can apply to other instrumentation as well, such as meters, DCS and PLC inputs.

The webinar shows you how to document “one-sided” calibrations, such as pH/ORP and gas sensors/analyzers. The approach can apply to other instrumentation as well, such as meters, DCS and PLC inputs.

 

Blog Posts
How Often Do Measurements Need to Be Calibrated?
Just in Time, or Just Too Late? A Kaizen Approach to Calibration
How to Improve Industrial Productivity with Loop Calibration
Temperature Calibration: Using a Dry Block to Calculate Total Uncertainty
How Can Advanced Calibration Strategies Improve Control Performance?
How to Calibrate a Pressure Transmitter

Webinar Recordings
Uncertainty in Calibration
Calibration Uncertainty and Why Technicians Need to Understand It
How to Avoid the Most Common Mistakes in Field Calibration
Learn Advanced Techniques in Field Calibration
How to Build an Industrial Calibration System Business Case
How to Use Calibration Tools for Accurate Process Temperature Measurement
How Does Low Flow Affect Differential Pressure Flowmeter Calibration?
Three Common Pitfalls of Pressure Calibration
How to Calibrate Differential Pressure Flowmeters

Free Downloads
ISA Industrial Calibration Worksheets
Measurement Uncertainty Analysis Excel template plus book excerpt
Calibration Handbook of Measuring Instruments book excerpt
In-Depth Guide to Calibration for the Process Industries eBook
Calibration Uncertainty for Non-Mathematicians white paper

 

About the Presenter
Ian Verhappen, P.Eng., CAP, is a senior project manager at CIMA+ where he specializes in industrial communications networks, including Foundation Fieldbus technology; control system migrations/upgrades; process analyzers; sample systems; and oil sands automation. Ian, an ISA Fellow, has been involved in digital communications since 1994. He helped to install the first multi-vendor Foundation Fieldbus project in 1996. Since then, he has served as both a project engineer/designer and an external review consultant for a number of companies in pulp and paper, mining, food processing, water and wastewater, oil sands processing, petrochemical and refining industries. Ian is an active ISA volunteer leader, serving as Vice-President of ISA Standards and Practices and a former ISA District 10 Vice President. As a leader in automation practices, he has worked closely with the Standards Council of Canada and the International Electrotechnical Commission (IEC). He currently serves as Canadian Chair of IEC TC65, SC65B and SC65E. He is co-author of several ISA books, including A Guide to the Automation Body of Knowledge and Foundation Fieldbus. An inductee into the Process Automation Hall of Fame, Ian earned a bachelor of science degree in environmental science and a bachelor of chemical engineering degree, both from the University of Alberta.

 

Connect with Ian
LinkedInEmail

 

About the Presenter
Ned Espy has been promoting calibration management with Beamex for more than 20 years. He has directed field experience in instrumentation measurement application for over 27 years. Today, Ned provides technical & application support to Beamex clients and partners throughout North America.

 

Connect with Ned
LinkedIn

 

 

 

About the Presenter
Roy Tomalino has been teaching calibration management for 14 years. Throughout his career, he has taught on four different continents to people from over 40 countries. His previous roles include technical marketing engineer and worldwide trainer for Hewlett-Packard and application engineer with Honeywell. Today, Roy is responsible for all Beamex training activities in North America.

 

Connect with Roy:
48x48-linkedinEmail

 

 


Related Posts

IDM Can Improve Plant Reliability and Reduce Downtime

There are hundreds of smart instruments including sensors and final control elements installed in medium-...
Bakhtiar Pour Ahmad Aug 12, 2022 5:30:00 AM

The Opportunities and Obstacles in Using Automation for PCB Assembly

Automation has revolutionized the printed circuit board (PCB) industry with enhanced product reliability ...
Suresh Patel Aug 9, 2022 5:30:00 AM

What are the Biggest Mistakes You Have Seen? Part 4

The following discussion is part of an occasional series showcasing the ISA Mentor Program, authored by G...
Greg McMillan Aug 5, 2022 5:30:00 AM