ISA Interchange

Webinar Recording: Practical Limits to Control Loop Performance

Written by Greg McMillan | Feb 11, 2019 3:42:27 PM

 

This educational ISA webinar was presented by Greg McMillan in conjunction with the ISA Mentor Program. Greg is an industry consultant, author of numerous process control books, 2010 ISA Life Achievement Award recipient and retired Senior Fellow from Solutia Inc. (now Eastman Chemical). This is Part 2 of a three-part series. To watch Part 1, click this link.

 

Editor's Note: This is Part 2 of a three-part educational webinar series. To watch Part 1, click this link. To watch Part 3, click this link.

 

Part 2 provides a quick review of Part 1 and then discusses the contribution of each PID mode, why reset time is orders of magnitude too small for most composition and temperature loops, the ultimate and practical limits to control loop performance, the critical role of dead time, and when PID gain that is too high or too low causes more oscillation.

 

ISA Mentor Program

The ISA Mentor Program enables young professionals to access the wisdom and expertise of seasoned ISA members, and offers veteran ISA professionals the chance to share their wisdom and make a difference in someone’s career. Click this link to learn more about the ISA Mentor Program.

 

About the Presenter
Gregory K. McMillan, CAP, is a retired Senior Fellow from Solutia/Monsanto where he worked in engineering technology on process control improvement. Greg was also an affiliate professor for Washington University in Saint Louis. Greg is an ISA Fellow and received the ISA Kermit Fischer Environmental Award for pH control in 1991, the Control magazine Engineer of the Year award for the process industry in 1994, was inducted into the Control magazine Process Automation Hall of Fame in 2001, was honored by InTech magazine in 2003 as one of the most influential innovators in automation, and received the ISA Life Achievement Award in 2010. Greg is the author of numerous books on process control, including Advances in Reactor Measurement and Control and Essentials of Modern Measurements and Final Elements in the Process Industry. Greg has been the monthly "Control Talk" columnist for Control magazine since 2002. Presently, Greg is a part time modeling and control consultant in Technology for Process Simulation for Emerson Automation Solutions specializing in the use of the virtual plant for exploring new opportunities. He spends most of his time writing, teaching and leading the ISA Mentor Program he founded in 2011.

 

Connect with Greg
LinkedIn