This guest post is authored by John Clemons, director of manufacturing IT at MAVERICK Technologies. John is co-chair of The Connected Enterprise track at ISA Automation Week in Nashville, Tenn., Nov. 5–7.
I often have people ask me questions like “Which MES should we use?” or “What kind of MES should we get?” My short answer is always “What kind of MES do you need?” And that’s always the best place to start. What do you need? What are your requirements? What are the business needs?
And that usually starts a much longer discussion on MES in general and then gets into the nuts and bolts of what kind of MES they really need. There’s no short answer to this of course, but there are several things to think about. The most fundamental point in deciding what kind of MES someone needs is that the answer is always the context. How does the MES fit into the architecture and what is the MES supposed to do?
There’s always a context for the MES because there are always other systems already in place in manufacturing. Maybe it’s a DCS and maybe it’s an HMI/SCADA. Maybe it’s an ERP. Or, maybe it’s all of the above. Regardless, the point is that MES has to fit in well with the other pieces of the architecture. So, in trying to decide what kind of MES is needed, ask the question: How does MES need to integrate with the other pieces of the architecture?
The flip side of this coin is all about what MES is supposed to do. This is often much more complicated that the architecture and it gets more complicated when you start to understand everything that MES can potentially do. But the issue here is the focus that’s needed not on the MES itself but on what it’s supposed to do in the manufacturing operation. So, in thinking about this, ask this question: How does MES need to drive manufacturing operations and influence behaviors in this specific setting?
To finish up, I’d like to provide just a few more thoughts on what kind of MES you really need. MES needs to work well with ERP and supply chain systems. We’re long past the point where manufacturing was disconnected from the business and from the supply chain. Manufacturing is an integral part of the business and MES must be an integral part as well. That means that we need MES that works well with ERP and supply chain systems.
We also need a single integrated architecture. MES is not a stand-alone solution. MES must be part of a total system that’s easy to integrate and support in the overall existing systems architecture. This MES architecture needs to have several key characteristics:
In the end, MES must be a solution that helps manufacturing become more flexible, react quickly and be responsive to the demands of the real world. If MES can do these things then MES can be successful. That’s ultimately the kind of MES that you need. So, think about these things when you ask the question “What kind of MES do we need?”
And, of course, there’s a lot more to it than can be explained in a short post like this. But the main points are here. Stay focused on the business. Look at the requirements. Look at the architecture. Make sure MES has a positive impact on the business. That’s the kind of MES that you need – that we all need.
John Clemons is MAVERICK’s director of manufacturing IT with more than 30 years of education and experience in technology engineering, product/service innovation, project management and consulting services for world-class manufacturing enterprises. Before MAVERICK, John was vice president of consulting at EnteGreat, where he was responsible for providing strategic direction and managed all aspects of operations for the consulting business unit. He earned his bachelor‘s degree in mathematics and computer science from Samford University in Birmingham, Ala. and received his master's degree in software engineering from Southern Methodist University in Dallas, Texas. Contact John at john.clemons@mavtechglobal.com.
