ISA Interchange

Webinar Recording: How to Use Key PID Controller Features

Written by Contributing Authors | Aug 14, 2017 2:42:07 PM

 

This educational ISA webinar was presented by Greg McMillan. Greg is an industry consultant, author of numerous process control books, 2010 ISA Life Achievement Award recipient and retired Senior Fellow from Solutia Inc. (now Eastman Chemical).

 

This ISA webinar on control valves is introduced by Greg McMillan and presented by Hector Torres, in conjunction with the ISA Mentor Program. Hector is a recipient of ISA's John McCarney Award for the article on opportunities and challenges for enabling new automation engineers. Hector has been a member of the ISA Mentor Program since its inception. In this webinar, he provides a detailed view of how to use key PID controller features that can greatly expand what you can achieve. The setting of anti-reset windup ARW limits, dynamic reset limit, eight different structures, integral dead band, and set-point filter. Feedforward and rate limiting are covered with some innovative application examples

About the Author
Gregory K. McMillan, CAP, is a retired Senior Fellow from Solutia/Monsanto where he worked in engineering technology on process control improvement. Greg was also an affiliate professor for Washington University in Saint Louis. Greg is an ISA Fellow and received the ISA Kermit Fischer Environmental Award for pH control in 1991, the Control magazine Engineer of the Year award for the process industry in 1994, was inducted into the Control magazine Process Automation Hall of Fame in 2001, was honored by InTech magazine in 2003 as one of the most influential innovators in automation, and received the ISA Life Achievement Award in 2010. Greg is the author of numerous books on process control, including Advances in Reactor Measurement and Control and Essentials of Modern Measurements and Final Elements in the Process Industry. Greg has been the monthly "Control Talk" columnist for Control magazine since 2002. Presently, Greg is a part time modeling and control consultant in Technology for Process Simulation for Emerson Automation Solutions specializing in the use of the virtual plant for exploring new opportunities. He spends most of his time writing, teaching and leading the ISA Mentor Program he founded in 2011.

 

Connect with Greg: