ISA Interchange

Welcome to the official blog of the International Society of Automation (ISA).

All Posts

TUNE YOUR LOOP: From the Certified Control Systems Technician Level I Review Course (TS00)

TUNE YOUR LOOP: Questions to keep you sharp.

 

Tune Your Loop is a series of posts consisting of questions from ISA Training Courses.

 

1. A (an)________ error must be correct for when a pressure transmitter is located
lower than the bottom of the vessel being measured.

  1. suppression
  2. zero
  3. elevation
  4. span

2. A process where material is fed and removed from the process at the same time
is called a __________ process.

  1. batch
  2. continuous
  3. distillation
  4. separation

3. The controlled variable may also be the _________ variable.

  1. disturbance
  2. manipulated
  3. measured
  4. handled

4. The density of water at standard temperature and pressure is __________ lbs/ft3.

  1. 62.4
  2. 14.7
  3. 27.7
  4. 0.433

5. The region between the limits within which a quantity is measured, received, or
transmitted, expressed by stating the lower and upper limits is called the
________.

  1. span
  2. linearity
  3. zero
  4. range

 

1. a

2. b

3. c

4. a

5. d

From the ISA course Certified Control Systems Technician (CCST) Level I Review Course (TS00) pre-instructional survey.


Related Posts

What No One Tells You About Industrial Automation Marketing (Part 1)

So you’re a marketer in an industrial automation company. You’ve got it down, right? At this point, you c...
Chris Sciulli Oct 20, 2020 5:15:00 AM

Leveraging Digital Technology in Manufacturing

The influence of digital technology on automation began with the introduction of distributed control syst...
Contributing Author Oct 16, 2020 5:00:00 AM

ISA President's Column: Putting the 'I' Into ISA

Reaching Our International Aspirations The International Society of Automation (ISA) President Eric Cosma...
ISA President Oct 13, 2020 5:00:00 AM